Chapter 5: Subsystem Maintenance and Upgrading
Figure 5-19: Removing the PSU Retention Screw on S12F-G1433
Step 4.
For S12F-R1432, remove the PSU by grabbing the
extraction handle and pulling the handle upwards. For
S12F-G1433, remove the PSU by pushing the handle
downwards. The extraction handle should gracefully
disconnect the PSU from the backplane connectors.
Once the PSU is dislodged, gently pull it out of the
subsystem. If the subsystem is mounted on a rack, use
another hand to support its weight while removing the
module. (See
the figures below)
Figure 5-20: Removing the PSU Module on S12F-R1432
Figure 5-21: Removing the PSU Module on S12F-G1433
5-15
