EonStor S12F-R1432/G1433 Installation and Hardware Reference Manual
Step 5.
Attach filler plates to the back of the enclosure’s left-side
and right-side forearms with two (2) 6-32 L6 screws.
Figure 2-5: Attaching Filler Plates
Step 6.
Gently
slide the enclosure into the rack until you feel some
resistance. That means the plastic stoppers on the
rackmount rails have engaged the rivets on the sides of
the enclosure. This is to ensure the enclosure is firmly
installed. (See the figure below)
Figure 2-6: Locations of the Rivets and the Stoppers
CAUTION!
At least two people are required to install the subsystem.
Step 8.
There are two (2) screw holes on each side of the chassis
ears. To
secure the subsystem to the rack, fasten two (2)
M5 x 30mm Pan Head screws through the holes. (See the
figure below)
2-10
