manualshive.com logo in svg

Icom MarineComander MXS-5000, Instruction Manual

Introducing the Icom MarineComander MXS-5000 – a versatile marine communication system designed to enhance your boating experience. Equip yourself with this cutting-edge device and navigate the seas with confidence. Ensure you have all the necessary information at your fingertips by downloading the comprehensive Instruction Manual for free from manualshive.com.

Share
Download
background image

i

FOREWORD

Thank  you  for  purchasing  Icom’s

  MXS-5000  Icom 

MarineCommander™ system. 

IMPORTANT

READ THIS  INSTRUCTION  MANUAL  CAREFULLY

 

before  attempting  to  operate  the  MarineCommand-
er™.

SAVE  THIS  INSTRUCTION  MANUAL.

  This  manual 

contains  important  safety  and  operating  instructions 
for the MarineCommander™.

EXPLICIT DEFINITIONS

WORD

DEFINITION

R

DANGER!

Personal death, serious injury or an explo-
sion may occur.

R

WARNING!

Personal  injury,  fire  hazard  or  electric 
shock may occur.

CAUTION

Equipment damage may occur.

NOTE

If disregarded, inconvenience only. No risk 
of personal injury, fire or electric shock.

Icom, Icom Inc. and the Icom logo are registered trademarks of 
Icom Incorporated (Japan) in Japan, the United States, the United 
Kingdom, Germany, France, Spain, Russia and/or other countries.
MarineCommander and MarineCommander logo are trademarks of 
Icom Incorporated. 

C-MAP is a trademark of Jeppesen.

All other products or brands are registered trademarks or trade-
marks of their respective holders.

This product includes software developed by the University of Cali-
fornia, Berkeley and its contributors.

TABLE OF CONTENTS

FOREWORD ······························································ i

IMPORTANT ······························································· i

EXPLICIT DEFINITIONS ············································ i

TABLE OF CONTENTS ·············································· i

Section 1 BASIC OPERATION DESCRIPTION ····1-1

Section 2 PLOTTER OPERATION ························2-1

Section 3 RADAR OPERATION ····························3-1

Section 4 SOUNDER OPERATION ······················4-1

Section 5 COMMON SETTING ·····························5-1

© Jeppesen 2011, All rights reserved.

Please inquire the purchase of C-MAP Max Chart and the question 
concerning C-MAP Max Chart to Jeppesen. 

Customer Support

Italy, Spain, Portugal, France, Luxemburg, Croatia, Slovenia, Turkey, 
Netherlands, Belgium, Greece, Cyprus, Israel, Africa, Middle East
Tel: +39 0585 794 800
E-mail: [email protected]

UK and Ireland
Tel: +44 1293 842603
E-mail: [email protected]

Germany, Austria, Switzerland
Tel: +49 6102 508430
E-mail: [email protected]

Poland
Tel: +48 58 760 6111
E-mail: [email protected]

Norway, Denmark, Greenland, Iceland
Tel: +47 51 46 47 99
E-mail: [email protected]

Finland, Sweden
Tel: +46 31 719 34 55
E-mail: [email protected]

Russia
Tel: +7 812 327 9894
E-mail: [email protected]

Australasia
Tel: +61 2 98 08 6200
E-mail: [email protected]

US A, Canada and South America
Tel: +1 508.477.8010
E-mail: [email protected]

Electronic charts are not legal replacements for 
paper charts.
Always carry and consult current official charts 
frequently.

Summary of Contents for MarineComander MXS-5000



































































































































































































Reviews:

No comments

Related manuals for MarineComander MXS-5000

Garmin GMR 404 Release Note preview
GMR 404
Brand: Garmin Pages: 2
Hama IR40MBT Operating Instructions Manual preview
IR40MBT
Brand: Hama Pages: 30
Hama IR320 Operation Instructions Manual preview
IR320
Brand: Hama Pages: 30
Hama DR10 Operating Instructions Manual preview
DR10
Brand: Hama Pages: 18
Hama Badradio SR-500 Operating Instruction preview
Badradio SR-500
Brand: Hama Pages: 5
Hama 62760 Operating Instruction preview
62760
Brand: Hama Pages: 42
Hama 54819 Operating Instructions Manual preview
54819
Brand: Hama Pages: 46
Hama DR1400 Quick Manual preview
DR1400
Brand: Hama Pages: 64
Hama DR1610BTS Quick Manual preview
DR1610BTS
Brand: Hama Pages: 66
Hama 00054844 Operating Instructions Manual preview
00054844
Brand: Hama Pages: 29
Hama 00054227 Operating Instructions Manual preview
00054227
Brand: Hama Pages: 50
Sangean WR-2 Manual preview
WR-2
Brand: Sangean Pages: 20
Sangean WR-2 Instruction Manual preview
WR-2
Brand: Sangean Pages: 16
Sangean U4 DBT+ User Manual preview
U4 DBT+
Brand: Sangean Pages: 27
Sangean DPR-99 Plus Operating Instructions Manual preview
DPR-99 Plus
Brand: Sangean Pages: 131
Sangean WFT-1 User Manual preview
WFT-1
Brand: Sangean Pages: 141
Sangean WFR-1 - DATASHEET 3 Datasheet preview
WFR-1 - DATASHEET 3
Brand: Sangean Pages: 1
E-Tech IM100 User Manual preview
IM100
Brand: E-Tech Pages: 19

Brands by name

Popular brands

Load more brands