Icom MarineComander MXS-5000, Instruction Manual

Page: 27 / 194

2-11
2
PLOTTER OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
MENU
WPT
FOCUS
LAYOUT
MOB
CLEAR
SUB
BRILL
RANGE
[DIAL]/
[ENTER]
[CLEAR]
[ ÙÚΩ≈ ]
•
Programming screen
3 waypoints are created in this route.
Push
(e.g. Name)
Push
Name programming:
q
Rotate [DIAL ] to select “Name,” and push [EN-
TER].
w
Input a route name of up to 16 characters.
• See page 5-31 for programming details.
e
Rotate [DIAL ] to select “OK,” then push [ENTER]
to set and return to the previous screen.
• If “Cancel” is selected, the “Setting Change” screen will
appear. Select “Yes” if you want to continue to program,
or select “No” if you want to cancel the program.
Comment programming:
q
Rotate [DIAL ] to select “Comment,” and push [EN-
TER].
w
Input a comment of up to 32 characters.
• See page 5-31 for programming details.
e
Rotate [DIAL ] to select “OK,” then push [ENTER]
to set and return to the previous screen.
• If “Cancel” is selected, the “Setting Change” screen will
appear. Select “Yes” if you want to continue to program,
or select “No” if you want to cancel the program.
Color selection:
q
Rotate [DIAL ] to select “Color,” and push [EN-
TER].
w
Rotate [DIAL ] to select the desired color, then push
[ENTER] to set and return to the previous screen..
After setting,
➥
rotate [DIAL ] to select “Save,” then
push [ENTER] to save the route and return to the
previous screen.
• If “Cancel” is selected, the “Setting Change” screen will
appear. Select “Yes” if you want to continue to program,
or select “No” if you want to cancel the program.