Icom MarineComander MXS-5000, Instruction Manual

Page: 165 / 194

5-19
5
COMMON SETTING
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
• Received Call Log — Erase Message
A message can be erased on the Received Call Log
Sub Menu screen.
When the Received Call Log screen is displayed,
q
rotate [DIAL] until the desired call log is highlighted,
then push [SUB].
• The Received Call Log Sub Menu screen is displayed.
Rotate [DIAL] until the “Erase Message” menu is
w
highlighted, then push [ENTER].
Rotate [DIAL
e
] to select “OK,” then push [ENTER]
to erase the message and return to the previous
screen.
• If “Cancel” is selected, the message erasing will be can -
celled.
• Received Call Log
—
Erase All Message
All messages can be erased on the Received Call Log
Sub Menu screen.
When the Route List screen is displayed, rotate
q
[DIAL] until the desired route is highlighted, then
push [SUB].
• The Route List Sub Menu screen is displayed.
Rotate [DIAL] until the “Erase All Message” menu is
w
highlighted, then push [ENTER].
Rotate [DIAL
e
] to select “OK,” then push [ENTER]
to erase all message and return to the previous
screen.
• If “Cancel” is selected, the all message erasing will be
cancelled.
<Received Call Log — Erase Message menu>
<Received Call Log
—
Erase All Message menu>
•
Auto Position Log
(MENU w Tool u DSC u Auto Position Log...)
This screen shows log for the specified vessel’s posi -
tion. The Vessel is specified in the DSC Setup Menu in
this DSC menu.
Make sure that the registered Individual ID has already
been selected in DSC Setup menu. (p. 5-24)
Push [ENTER] to select a vessel.
q
Rotate [DIAL] to select Position log.
w
Push [ENTER] to put the transmitted station’s posi -
e
tion on the map when the Call has been transmit -
ted.
Push [CLEAR] to exit the screen and return to the
r
Focus bar.
<Auto Position Log menu>
•
Auto Position Log screen