2
2-2
PLOTTER OPERATION
Plotter display
■
q
w
e
r
q
CURSOR POSITION
Shows the pointed position* of the cross hair cur-
➥
sor in latitude/longitude, the bearing and distance
of the pointed position relative to the current ves-
sel position.
* Depending on the presetting, Loran-C Time differ-
ences is displayed instead of the position data.
Placing the cursor directly over the center of the
➥
object icon shows the object’s position informa-
tion.
w
YOUR VESSEL ICON
Indicates the current vessel’s position. The Icon rep-
resents the current position of your vessel.
• The vessel icon points to the bow.
• When no heading information is received, the vessel
icon points to the COG (Course Over Ground).
• When both the heading and COG information are re
-
ceived, the vessel icon is displayed as “
Ô
.”
e
NAVIGATION SCREEN
Appears only when the Navigation function is ON.
It shows the destination information.
r
PLOTTER DISPLAY INFORMATION
Shows the selected plotter display mode, display
scale,
radar overlay status
and an arrow which indi-
cates the north.
• The selected plotter display mode icon (e.g. “
”) is
turned ON when it is enabled. (p. 2-5)
• When the cross hair cursor points to the plotter display
mode icon, push [SUB] to switch the mode between “N-
UP” (North-up). “C-UP” (Course-up), “AC-UP” (Automat-
ic Course-up), “TM” (True Motion) and “AR” (Automatic
Range).
• When the cross hair cursor points to the radar overlay
icon (“
”), push [SUB] to turn the Radar Overlay func-
tion ON or OFF. (The Radar Overlay function can be
turned ON only when the radar unit is in the transmit
status.)
Summary of Contents for MarineComander MXS-5000
Page 1: ...INSTRUCTION MANUAL MARINECOMMANDER SYSTEM MXS 5000 ...
Page 146: ......
Page 192: ...MEMO ...
Page 193: ...MEMO ...