Icom MarineComander MXS-5000, Instruction Manual

Page: 99 / 194

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
3-27
3
RADAR OPERATION
Alarm sounds when the target
comes into or goes out of the zone.
Alarm zone
Fig. 3
Target (other ship, etc.)
The unit has an alarm function to prevent your ship from
collisions. If other ships or islands, etc. come into the pro-
grammed alarm zone, the function alerts you with an alarm.
You can set the desired range and bearing for an alarm
zone.
■
Alarm zone setting
D Setting and using the alarm function
Fig. 1
Fig. 2
Alarm Zone
Zone Alarm1
“IN” is set
Fig. 1
Fig. 2
Alarm Zone
Zone Alarm1
“IN” is set
D Setting the Alarm Zone
q
Push [MENU], and then rotate [DIAL] until the
“Alarm Setup” menu becomes highlighted.
w
Push [ENTER], and then rotate [DIAL] to select
“Zone Alarm1” or “Zone Alarm2.”
• Two Zones can be set, for diferent directions
and targets.
e
Push [ENTER], and then rotate [DIAL] to select
“IN” or “OUT.”
• IN... : Alarm sounds when the target comes
into the zone.
• OUT... : Alarm sounds when the target goes out
of the zone.
r
Push [ENTER], and then push [  ] to move
the cursor to where you want to set the alarm
zone, and then push [ENTER].
• The starting zone appears on the screen.
(Fig. 1)
• Push [CLEAR] to cancel and re-set the zone
position.
t
Push [  ] to adjust the angle, and push
[

]
to
set the distance of the alarm zone.
(Fig. 2)
y
Push [ENTER] to set the Alarm Zone.
u
If a target comes into or goes out of the alarm
zone, an alarm beep is emitted.
• Push [CLEAR] to cancel the alarm and function.
<Alarm Setup menu>