2-48
2
PLOTTER OPERATION
Chart Setup (MENU
■
w
Chart Setup) (Continued)
Manual Display Mode setting
D
(MENU
w
Chart Setup
u
Manual – Display Mode)
This item can be set only when “Manual” is selected in
the “Chart Display Mode” item.
Push [MENU], then rotate [DIAL] until the “Chart
q
Setup” menu is highlighted, then push [ENTER].
Rotate [DIAL] until the “Manual – Display Mode”
w
menu is highlighted, then push [ENTER].
Rotate [DIAL] until the desired menu is highlighted,
e
then push [ENTER].
•
Safety Contour
–
Shading Mode
( MENU
w
Chart Setup
u
Manual - Display Mode
u
Safety Contour
u
Shading Mode)
This item enables the ocean surface on the plotter dis-
play to change the color, depending on the settings
and depth.
• Dynamic
: The color of the ocean sur
-
face turns white when the
water depth becomes deep-
er.
• Dynamic Inverted
: The color of the ocean sur
-
face turns white when the
water depth becomes shal-
lower.
• Manual Shading
: You can manually set the
water depth values (Shal-
low and Deep) to change the
color of the ocean surface.
•
Safety Contour
–
Manual - Shallow
( MENU
w
Chart Setup
u
Manual - Display Mode
u
Safety Contour
u
Manual - Shallow)
This item can be set only when “Manual Shading” is
selected in the “Shading Mode” item.
The color of the ocean surface is changed to the Shal-
low, when the water depth is shallower than this set
value.
Rotate [DIAL] to adjust the Shallow value smaller
➥
than the “Manual - Depth” value as described below.
(Default: 3 m)
•
Safety Contour
–
Manual - Depth
( MENU
w
Chart Setup
u
Manual - Display Mode
u
Safety Contour
u
Manual - Depth)
This item can be set only when “Manual Shading” is
selected in the “Shading Mode” item.
The color of the ocean surface is changed to the Depth,
when the water depth is deeper than this set value.
Rotate [DIAL] to adjust the Deep value larger than
➥
the “Manual - Shallow” value as described above.
(Default: 6 m)
<Safety Contour
–
Shading Mode menu>
<Safety Contour
–
Manual - Shallow menu>
<Safety Contour
–
Manual - Depth menu>
Summary of Contents for MarineComander MXS-5000
Page 1: ...INSTRUCTION MANUAL MARINECOMMANDER SYSTEM MXS 5000 ...
Page 146: ......
Page 192: ...MEMO ...
Page 193: ...MEMO ...