Icom MarineComander MXS-5000, Instruction Manual

Page: 81 / 194

3-9
3
RADAR OPERATION
■
Long Pulse function
(MENU w Radar Setup  Signal Process  Pulse)
To magnify the blips for easier viewing of small tar-
gets, the long pulse and echo stretch (p. 3-8) func-
tions are available. When the long pulse is used in the
3 ⁄
4
to 2 nm range, this function magnifies target ech-
oes to the backward direction of the target.
• Pulse selection
q
Push [MENU] to enter the Menu screen.
w
Rotate [DIAL] until the “Radar Setup” menu be -
comes highlighted.
e
Push [ENTER], and then rotate [DIAL] until the
“Signal Process” menu becomes highlighted.
r
Push [ENTER], and then rotate [DIAL] until the
“Pulse” menu becomes highlighted.
t
Push [ENTER], and then rotate [DIAL] to select a
desired pulse type, “Short” or “Long.”
y
Push [ENTER].
• “SP” or “LP” appears in the upper left of the screen.
u
Push [CLEAR] to exit the menu screen.
MENU
WPT
FOCUS
LAYOUT
MOB
CLEAR
SUB
BRILL
u
[DIAL]/
[ENTER]
[CLEAR]
[MENU]
[ ���� ]
[LAYOUT]
<Long Pulse function menu>
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21