Icom MarineComander MXS-5000 Instruction Manual Download Page 32

Page: 32 / 194

2-16

PLOTTER OPERATION

Route navigation function (Continued)

■

• Route List

—

Edit Route Info

A route information can be edited on the Route List
Sub Menu screen.

When the Route List screen is displayed, rotate

[DIAL] until the desired route is highlighted, then
push [SUB].

• The Route List Sub Menu screen is displayed.

Rotate [DIAL] until the “Edit Route Info...” menu is

highlighted, then push [ENTER].

• “Save Route” screen appears.

Rotate [DIAL

]

to select “Save,” then push [ENTER]

to save the route and return to the previous screen.

• If “Cancel” is selected, the setting will be cancelled.
• If you change the route contents, see below.

When the “Edit Route Info” menu is selected.

Push

Name programming:

Rotate [DIAL

] to

select “Name,” and push [EN-

TER].

Input a route name of up to 16 characters.

• See page 5-31 for programming details.

Rotate [DIAL

]

to select “OK,” then push [ENTER]

to set and return to the previous screen.

• If “Cancel” is selected, the “Setting Change” screen will

appear. Select “Yes” if you want to continue to program,
or select “No” if you want to cancel the program.

Comment programming:

Rotate [DIAL

] to

select “Comment,” and push [EN-

TER].

Input a comment of up to 32 characters.

• See page

5-31 for programming details.

Rotate [DIAL

]

to select “OK,” then push [ENTER]

to set and return to the previous screen.

• If “Cancel” is selected, the “Setting Change” screen will

appear. Select “Yes” if you want to continue to program,
or select “No” if you want to cancel the program.

Color selection:

Rotate [DIAL

] to

select “Color,” and push [EN-

TER].

Rotate [DIAL

]

to select the desired color, then push

[ENTER] to set and return to the previous screen..

After setting,

➥

rotate [DIAL

]

to select “Save,” then

push [ENTER] to save the route and return to the
previous screen.

• If “Cancel” is selected, the “Setting Change” screen will

appear. Select “Yes” if you want to continue to program,
or select “No” if you want to cancel the program.

<Route List

—

Edit Route Info menu>

Summary of Contents for MarineComander MXS-5000



































































































































































































Search results

Summary of Contents for MarineComander MXS-5000

Reviews:

Related manuals for MarineComander MXS-5000

Brands by name

Popular brands

Icom MarineComander MXS-5000, Instruction Manual

Search results

Summary of Contents for MarineComander MXS-5000

Reviews:

Related manuals for MarineComander MXS-5000

Brands by name

Popular brands