Icom MarineComander MXS-5000 Instruction Manual Download Page 148

Page: 148 / 194

5-2

COMMON SETTING

Tool

■

(MENU

Tool)

List

•

Waypoint List

(MENU

Tool

List

Waypoint...)

The registered Waypoints are listed.

Push [MENU] to enter the Menu screen.

Rotate [DIAL] until the “Tool” menu becomes high-

lighted.
Push [ENTER] to enter the “Tool” menu.

e
r

Rotate [DIAL] until the “List” menu becomes high-

lighted, and push [ENTER].

Rotate [DIAL] until the “Waypoint...” menu becomes

highlighted, and push [ENTER].

• The Waypoint List is displayed.
• When [SUB] is pushed, the following operations can be

made:

    - Sort
    - Goto Waypoint
    - Go on Chart
    - Add Waypoint
    - Edit Wapoint
    - Erase Waypoint
    - Erase All Waypoint)

Rotate [DIAL] to select the desired Waypoint.

• The selected Waypoint data are displayed.

Push [CLEAR] to exit the “Waypoint...” menu.

<Waypoint List menu>

<Sort menu>

•

Waypoint List

—

Sort

The registered Waypoint data can be sorted by its
Symbol, Name, Group, Comment, Position, Date/

Time, Temperature, Depth, Bearing and Range.

When the Waypoint List is displayed, push [SUB] to

display the Waypoint Sub Menu screen.
Push [ENTER] to enter the “Sort” menu.

Rotate [DIAL] until your desired sort option becomes

highlighted, and push [ENTER].

The registered Waypoint data are sorted by the se-

lected option.

Summary of Contents for MarineComander MXS-5000



































































































































































































Search results

Summary of Contents for MarineComander MXS-5000

Reviews:

Related manuals for MarineComander MXS-5000

Brands by name

Popular brands

Icom MarineComander MXS-5000, Instruction Manual

Search results

Summary of Contents for MarineComander MXS-5000

Reviews:

Related manuals for MarineComander MXS-5000

Brands by name

Popular brands