Icom MarineComander MXS-5000, Instruction Manual

Page: 58 / 194

2-42
2
PLOTTER OPERATION
Alarm Setup (MENU
■
w Alarm Setup) (Continued)
Safety Check D
(MENU w Alarm Setup u Safety Check)
The Safety Check function checks dangerous objects
or shallow depth on a way to the destination, before
starting the navigation.
Push [MENU], then rotate [DIAL] until the “Alarm Set-
q
up” menu is highlighted, then push [ENTER].
Rotate [DIAL] until the “Safety Check” menu is high-
w
lighted, then push [ENTER].
Rotate [DIAL] to select the Safety Check option.
e
• OFF : The Safety Check function is OFF.
• Color : The Safety Check function is ON.
- When dangerous objects or shallow depth
are detected after the safety check, the
navigation line turns red.
- When no dangerous objects or shallow
depth are detected after the safety check,
the navigation line turns blue.
- When the checked route has no detail
map, the navigation line turns yellow.
After finishing the navigation, the naviga-
tion line disappears.
• Color & Pop-up
: The Safety Check function is ON. A pop-
up screen appears when the navigation
line turns red, blue or yellow after the safety
check as described above.
Push [ENTER] to set, then exit the “Safety Check”
r
menu.
• To cancel the setting, push [CLEAR].
Safety Check Range setting D
(MENU w Alarm Setup u Safety Check Range)
Push [MENU], then rotate [DIAL] until the “Alarm Set-
q
up” menu is highlighted, then push [ENTER].
Rotate [DIAL] until the “Safety Check Range” menu
w
is highlighted, then push [ENTER].
Rotate [DIAL] to set the Safety Check Range to be-
e
tween 0.01 nm and 10.00 nm. (Default: 0.30 nm)
Push [ENTER] to set, then exit the “Safety Check
r
Range” menu.
• To cancel the setting, push [CLEAR].
Safety Check Depth setting D
(MENU w Alarm Setup u Safety Check Depth)
Push [MENU], then rotate [DIAL] until the “Alarm Set-
q
up” menu is highlighted, then push [ENTER].
Rotate [DIAL] until the “Safety Check Depth” menu
w
is highlighted, then push [ENTER].
Rotate [DIAL] to set the Safety Check Depth to be-
e
tween 1 m and 2800 m. (Default: 9 m)
Push [ENTER] to set, then exit the “Safety Check
r
Depth” menu.
• To cancel the setting, push [CLEAR].
<Safety Check menu>
<Safety Check Range menu>
<Safety Check Depth menu>