Icom MarineComander MXS-5000 Instruction Manual Download Page 169

Page: 169 / 194

5-23

COMMON SETTING

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21

• Group ID

—

Edit Group ID

An Group ID contents can be edited on the Group ID
Sub Menu screen.

When the Group ID List is displayed, rotate [DIAL]

until the desired Group ID becomes highlighted.

Push [SUB] to display the Group ID Sub Menu

screen.
Rotate [DIAL] until the “Edit Group ID” menu be-

comes highlighted, and push [ENTER].

• “Group ID” screen appears.

Rotate [DIAL] to select the desired item, and push

[ENTER].

• See the previous page for details.

Rotate [DIAL]

to select “Save,” then push [ENTER]

to save the Group ID and return to the previous
screen.

• If “Cancel” is selected, the “Setting Change” screen will

appear. Select “Yes” if you want to continue, or select
“No” if you want to cancel.

• Group ID

—

Erase Group ID

An Group ID can be erased on the Group ID Sub Menu
screen.

When the Group ID List is displayed, rotate [DIAL]

until the desired Group ID becomes highlighted.

Push [SUB] to display the Group ID Sub Menu

screen.
Rotate [DIAL] until the “Erase Group ID” menu be-

comes highlighted, and push [ENTER].

Rotate [DIAL]

to select “OK,” then push [ENTER] to

erase the Group ID and return to the previous screen.

• If “Cancel” is selected, the Group ID erasing will be can

celled.

• Group ID

—

Erase All Group ID

All Group ID can be erased on the Group ID Sub Menu
screen.

When the Group ID List is displayed, push [SUB] to

display the Group ID Sub Menu screen.
Rotate [DIAL] until the “Erase All Group ID” menu

becomes highlighted, and push [ENTER].
Rotate [DIAL]

to select “OK,” then push [ENTER]

to erase all Group ID and return to the previous
screen.

• If “Cancel” is selected, the Group ID erasing will be can

celled.

<Group ID

—

Edit Group ID menu>

•

Group ID screen

<Group ID

—

Erase Group ID menu>

<Group ID

—

Erase All Group ID menu>

Summary of Contents for MarineComander MXS-5000



































































































































































































Search results

Summary of Contents for MarineComander MXS-5000

Reviews:

Related manuals for MarineComander MXS-5000

Brands by name

Popular brands

Icom MarineComander MXS-5000, Instruction Manual

Search results

Summary of Contents for MarineComander MXS-5000

Reviews:

Related manuals for MarineComander MXS-5000

Brands by name

Popular brands