background image

WR-2 Instruction manual   

Important Safety Instructions 

1.  Read these instructions . 

2.  Keep these instructions . 

3.  Heed all warnings .  

4.  Follow all instructions . 

5.  Do not use this apparatus near water . 

6.  Clean only with dry cloth . 

7.  Do not block any ventilation openings . Install in accordance with the manufacturer s 

instruction . 

8.  Do not install near any heat sources such as radiators , heat registers , stoves, or other 

apparatus ( including amplifiers ) that produce heat . 

9.  Do not defect the safety purpose of the polarized or grounding-type plug . A polarized plug 

has two blades with one wider than the other . A grounding type plug has two blades and a 

third grounding prong . The wide blade or the third prong are provided for your safety . If 

the provided plus does not fit into your outlet , consult an electrician for replacement of the 

obsolete outlet . 

10.   Protect the power cord from being walked on or pinches particularly at plugs , 

convenience receptacles , and the point where they exit from the apparatus . 

11.  Only use attachments/accessories specified by the manufacturer .  

12.  Use only with the cart , stand , tripod , bracket , or table specified by the manufacturer , or 

sold with the apparatus . When a cart is used , use caution when moving the 

cart/apparatus combination to avoid injury from tip-over . 

13.   Unplug this apparatus during lightning storms or when unused for long period of time . 

14.  Refer all servicing to qualified service person . Servicing is required when the apparatus 

has been damaged in anyway , such as power-supply cord or plug is damaged , liquid has 

been spoiled or objects have been fallen into the apparatus , the apparatus has been 

exposed to rain or moisture , does not operate normally or has been dropped . 

15.  To reduce the Risk of Fire or Electric Shock , do not expose this appliance to rain or 

moisture . 

16.  The Shock Hazard Marking and Associated Graphical Symbol is provided on the rear 

panel of unit . 

17.  Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids , 

shall not be placed on the apparatus .  

Summary of Contents for WR-2

















Reviews: