![background image](http://html1.mh-extra.com/html/icom/id-51a/id-51a_advanced-manual_2038182269.webp)
16
MENU SCREEN
16-14
■
Menu items and Default settings (Continued)
NOTE:
The default settings shown below are for the USA version.
The default settings may differ, depending on your transceiver version.
Sets the beep output level.
Selects whether or not the beep output level
can be adjusted by the [VOL] control.
Turns the confirmation beep tones when
key is pushed, ON or OFF.
Turns the scan stop beep ON or OFF.
Turns the standby beep function in the DV
mode ON or OFF.
Selects the audio output option during a
sweep.
Sets to automatically correct the time us-
ing a GPS signal.
Sets the current date and time.
Enters the time difference between UTC
and the local time.
Turns the Auto power OFF function ON or
OFF.
0~
3
~9
In this item, set the Sound options.
OFF
or ON
OFF or
ON
OFF
or ON
OFF or
ON
OFF, ON, ON (to me:High Tone) or
ON (to me:Alarm/High Tone)
In this item, set the Time options.
OFF or
Auto
–14:00~
±0:00
~+14:00
OFF
, 30min, 60min, 90min or 120min
DESCRIPTIONS
RANGE OR VALUE (Default is shown in bold)
Selects to mute the SUB band audio signal
while receiving on the MAIN band, and/or
sound a beep when a signal disappears
on the SUB band.
OFF
, Mute, Beep or Mute & Beep
Turns the Home CH Beep ON or OFF.
OFF or
ON
Turns the Band edge beep ON or OFF.
OFF
or ON
Selects to adjust the audio output level of
all bands together, all separately, or just
the BC Radio separately.
All
, BC Radio Separate or Separate
Sets the initial audio output level difference
between the BC Radio and the A and B
bands when “All” is set in “Volume Select.”
–
5~
0
~+5
Turns the Earphone mode ON or OFF.
OFF
or ON
Enters the Terminal mode.
<<Terminal Mode>>
<<Access Point Mode>>
In this item, enter the Terminal mode or Access Point mode.
Enters the Access Point mode.
Previous view