![background image](http://html1.mh-extra.com/html/icom/id-51a/id-51a_advanced-manual_2038182267.webp)
16
MENU SCREEN
16-12
■
Menu items and Default settings (Continued)
NOTE:
The default settings shown below are for the USA version.
The default settings may differ, depending on your transceiver version.
OFF,
Auto (Short)
, Auto (Middle) or Auto
(Long)
OFF
or ON
In this item, set other options.
Push
or Hold
OFF
or ON
OFF or
ON
OFF, 1min, 3min,
5min
, 10min, 15min or
30min
OFF or
ON (DUP)
, ON (DUP,TONE)
Normal
, No SQL, No VOL or ALL
DESCRIPTIONS
RANGE OR VALUE (Default is shown in bold)
Selects the Power Save options to re-
duce current drain and conserve bat-
tery power.
Selects the [SQL] monitor function
method.
Turns the Auto Repeater function ON
or OFF.
Turns the dial speed acceleration ON
or OFF.
Selects the key lock type when the Key
Lock function is turned ON.
Turns the PTT Lock function ON or OFF.
Turns the Busy Lockout function ON or
OFF.
Selects the Time-Out Timer time op-
tions.
OFF
or ON
1~
5
~10 or OFF
0.5sec
, 1.0sec, 1.5sec, 2.0sec, 2.5sec or
3.0sec
HS-95 or
Other
OFF, 1min, 2min,
3min
, 4min, 5min, 10min
or 15min
1~
2
~4
1~
2
~4
4800bps or
9600bps
Sets the internal microphone sensitiv-
ity to suit your preference.
Sets the external microphone sensitiv-
ity to suit your preference.
Selects the data transmission speed for
low-speed communication, or between
the [DATA] jack and external modules
like a GPS receiver, and so on.
Turns the VOX function ON or OFF.
Sets the VOX gain level.
Sets the VOX Delay time.
Sets the VOX Time-Out Timer to pre-
vent an accidental prolonged transmis-
sion.
Selects the headset type to be used for
the VOX function to limit the maximum
audio output level to protect the head-
set speaker.
Single or
All
Allows continuous frequency selection
across all bands by rotating [DIAL].
[A]:BAND [B]:VFO/MR [
J
]:UP [
K
]:DOWN
[A]:T-CALL [B]:
–
[
J
]:
–
[
K
]:
–
Selects the key function to be used
while receiving or in the standby mode.
Selects the key functions to be used
while transmitting.
OFF
, ON (Echo Back OFF) or ON (Echo Back ON)
01~
86
~DF
300bps, 1200bps, 4800bps, 9600bps,
19200bps or
Auto
OFF
or ON
Selects whether or not to use the [DATA]
jack to remotely control the ID-51A/E.
Sets the transceiver's unique CI-V
hexadecimal address code.
Sets the CI-V code transfer speed.
Turns the CI-V Transceive function ON
or OFF.
Previous view