background image

5

BASIC OPERATION

5-4

 

Dualwatch operation (Continued)

 

D

Audio mute during Dualwatch operation

Dualwatch operation simultaneously monitors two fre-
quencies.
The ID-51A/E has two independent receiver circuits, A 
band and B band.
Depending on the operating band or mode, as shown 
to the right, the SUB band audio signal is muted. In 
such case, “

” appears.

During Dualwatch operation, the audio output may be 
interrupted when the frequency is changed while scan-
ning, or by other factors.

 SUB band mute status

MAIN band

SUB band

DV mode

DV mode

FM-N mode

FM-N mode

DV mode

FM-N mode

AIR band

AIR band

A/B band selection in the DR screen

The DR screen can be displayed on A band (upper) 
or B band (lower).
When the DR screen is displayed on A band, and the 
DR screen is selected in B band, the previously dis-
played frequency or memory before entering the DR 
screen is displayed on A band.

 Display image of the DR screen

DR screen

A band

B band

A band

B band

Appears when the SUB band 
audio signal is muted.

MAIN band

SUB band

Example: MAIN band is in the FM-N mode.
     

SUB band is in the DV mode.

Previous view

Summary of Contents for ID-51A






























































































































































































































































































































































































































Reviews: