RS-P1
Remote control transmitter,
1-button remote
Electronic relays are used for radio remote control of gates, shutters, li-
ghting, arming alarm systems, etc. The remote control system consisting
of a transmitter (remote) and receiver (relay). There is a possibility of co-
operation between many transmitters to one receiver and one transmitter
to multiple receivers.
Remote control transmitter RS-P1 cooperate with dedicated pro-
duction units F&F: monostable receiver RS-407M monostable and
bistable receiver RS-407B.
The impulse caused by the push of a button on the remote control to send
a coded signal to the receiver. Remote control is protected against break
transmission after releasing the button. Thanks to this, even the shortest
activation function is the full frame of data transmissions. Data transmis-
sion from the remote control is indicated by flashing of red LED on the
remote.
Programming guide (pairing the transmitter and receiver) is atta-
ched with the receiver RS-407M and RS-407B.
Purpose
Functioning
F&F Filipowski sp. j.
Konstantynowska 79/81, 95-200 Pabianice, POLAND
phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71
www.fif.com.pl; e-mail: [email protected]
Do not dispose of this device in the trash along with other waste!
According to the Law on Waste, electro coming from households free of charge and can
give any amount to up to that end point of collection, as well as to store the occasion of
the purchase of new equipment (in accordance with the principle of old-for-new, regard-
less of brand). Electro thrown in the trash or abandoned in nature, pose a threat to the
environment and human health.
