Icom ID-51A Advanced Manual Download Page 223

Page: 223 / 413

SCAN OPERATION

13-6

When a scan name is assigned.

When a scan name is assigned, the scan type can be
set by selecting the scan name from the scan type list.
(Step

on page 13-5.)

• When the scan name is assigned

• When the program link name is assigned

• When the scan name is not assigned

• When the program link name is not assigned

VFO mode scan (continued)

Scan name
“Scan 0”

When a program link name is assigned.

When a program link name is assigned, the scan type
can be set by selecting the program link name from the
scan type list. (Step

on page 13-5.)

Scan edges

Program link

Program link
name “Link 0”

NOTE:

The scan name is not displayed during a scan.

NOTE:

The program link name is not displayed during

a scan.

Previous view

Summary of Contents for ID-51A






























































































































































































































































































































































































































Search results

Summary of Contents for ID-51A

Reviews:

Brands by name

Popular brands

Icom ID-51A, Advanced Manual

Search results

Summary of Contents for ID-51A

Reviews:

Brands by name

Popular brands