Icom ID-51A Advanced Manual Download

Page: 126 / 413

D-STAR OPERATION <ADVANCED>

9-31

■

Entering information into Repeater List

New repeater entry (Continued)

10. Setting the duplex direction

• “DUP

–

” is automatically set when the access re-

peater frequency is entered in [9. Entering the

access repeater frequency].

• If necessary, you can change the duplex direction.

Push D-pad(



) to select “DUP,” and then push D-

pad(Ent).

D-pad

(

)

(Ent)

Push D-pad(



) to select the duplex direction.

• OFF: Turn the duplex function OFF.

For a simplex operation, this item MUST be set to
“OFF.”

• DUP–: The transmit frequency shifts down from the re-

ceive frequency by the offset amount.

• DUP+: The transmit frequency shifts up from the receive

frequency by the offset amount.

After setting, push D-pad(Ent).

11. Entering the frequency offset

• The offset value* is automatically set when the ac-

cess repeater frequency is entered in [9. Entering
the access repeater frequency].

* The default value differs, depending on the transceiver

version.

• If necessary, you can change the frequency offset.

Push D-pad(



) to select “OFFSET FREQ,” and then

push D-pad(Ent) to enter the frequency offset edit
mode.

• A cursor appears and blinks.

Rotate [DIAL] to enter the frequency offset.

Push to move the cursor backward, or push to
move the cursor forward.

Repeat steps

and

to enter the frequency off-

set.

After entering, push D-pad(Ent).

☞

Continued on the next page.

Previous view

Summary of Contents for ID-51A






























































































































































































































































































































































































































Search results

Summary of Contents for ID-51A

Reviews:

Related manuals for ID-51A

Brands by name

Popular brands

Icom ID-51A, Advanced Manual

Search results

Summary of Contents for ID-51A

Reviews:

Related manuals for ID-51A

Brands by name

Popular brands