Icom ID-51A Advanced Manual Download Page 36

Page: 36 / 413

BASIC OPERATION

5-2

■

Turning ON power

➥

Hold down [ ] for 1 second to turn ON power.

• Hold down [ ] for 1 second to turn OFF power.
• After the opening message and power source voltage

are displayed, the operating frequency or repeater name
appears.

■

Adjusting the audio level

➥

Rotate [VOL] to adjust the audio level.

• If the squelch is closed, hold down [SQL] while adjusting

the audio level.

• The display shows the volume level while adjusting.

Volume level display

No audio

Maximum audio

When “JA3YUA/ID51” is set as
your own (MY) call sign and note.

[VOL]

[ ]

TIP:

The opening message and power source volt-

age display options can be turned ON or OFF in the
Display menu.
(MENU > Display >

Opening Message

) (p. 16-84)

(MENU > Display >

Voltage (Power ON)

) (p. 16-84)

TIP:

The beep level is adjusted in the Sounds menu.

(MENU > Sounds >

Beep Level

) (p. 16-89)

Previous view

Summary of Contents for ID-51A






























































































































































































































































































































































































































Search results

Summary of Contents for ID-51A

Reviews:

Related manuals for ID-51A

Brands by name

Popular brands

Icom ID-51A, Advanced Manual

Search results

Summary of Contents for ID-51A

Reviews:

Related manuals for ID-51A

Brands by name

Popular brands