Icom ID-51A Advanced Manual Download Page 384

Page: 384 / 413

OPTIONS

18-2

■

Option list

Desktop charger

Power adapter

Fuse: 4 A

Fuse: 5 A

Fuse: 4 A

• HM-186LS

speaker

microphone

For operation while con-

veniently hanging the
transceiver from your
belt, and so on.

• HM-75LS

remote

control

speaker

microphone

Allows you to remotely
select operating chan-
nels, and other functions.

• OPC-254L

power

cable

For operation and charging using an external power

source.

• HM-153LS/HM-166LS

earphone

microphone

Ideal for hands-free operation: clip the HM-153LS/

HM-166LS (with integrated PTT switch) to your lapel
or breast pocket.

Allows you to operate in wet environments.

• BC-202

desktop

charger

+BC-123SA/SE

adapter

Rapidly charges the BP-271

i-ion

battery

pack

in ap-

proximately 2 hours.

Rapidly charges the BP-272

i-ion

battery

pack

in ap-

proximately 3.5 hours.

•

CP-12L

cigarette

lighter

cable

with

noise

filter

•

CP-19R

cigarette

lighter

cable

with

con

verter

You can to operate the transceiver through a 12 V

cigarette lighter socket.

You can also charge the attached battery pack.
( By default, the battery pack cannot be charged dur-

ing power ON.)

CP-19R: A built-in DC-DC converter provides an 11 V

DC output.

CP-12L

HM-166LS

HM-153LS

CP-19R

• HM-183LS

speaker

microphone

For operation while conveniently hanging the trans-

ceiver from your belt, and so on.

Allows you to operate in wet environments.

Previous view

Summary of Contents for ID-51A






























































































































































































































































































































































































































Search results

Summary of Contents for ID-51A

Reviews:

Related manuals for ID-51A

Brands by name

Popular brands

Icom ID-51A, Advanced Manual

Search results

Summary of Contents for ID-51A

Reviews:

Related manuals for ID-51A

Brands by name

Popular brands