manualshive.com logo in svg

Icom ID-51A, Advanced Manual

Share
Download
Icom ID-51A Advanced Manual Download Page 372

17

OTHER FUNCTIONS

17-18

•

 Removing the microSD card

 

■

Cloning function

 

D

 Transceiver-to-Transceiver cloning using a microSD 
card (Continued)

 

y

Push D-pad(Ent) to set the file name.

D-pad

(

)

(Ent)

  The confirmation screen “Save file?” appears.

 

u

 Push  D-pad(

) to select “YES,” and then push D-

pad(Ent) to save.

  •  While saving, a progress bar is displayed, then the “SD 

CARD” screen is displayed after the save is completed.

 

i

 Push  [MENU]

 to exit the MENU screen.

2.  Remove the microSD card from the master trans-

ceiver, and then insert it into the sub transceiv-
er.

 

o

 Hold down the master transceiver’s [ ] to turn OFF 
the power.

!0

  Remove the microSD card from the master trans-

ceiver as shown to the right.

!1

  Attach the removed microSD card to the sub trans-

ceiver, then hold down the sub transceiver’s [ ] to 
turn ON the power.

Slot cover

Slot cover

Push the microSD card 
until a click sounds.

Pull the microSD 
card out.

NEVER

 forcibly or inversely insert the card.

It will damage the card and/or the slot.

Previous view

Summary of Contents for ID-51A






























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands