manualshive.com logo in svg

Icom ID-51A, Advanced Manual

Share
Download
Icom ID-51A Advanced Manual Download Page 94

8

D-STAR OPERATION <BASIC>

8-23

 

☞

Continued on the next page

Select the file 
to be loaded

Select

5. Updating the Repeater List

u

 Push  [MENU]

.

i

   Push  D-pad(

) to select the root item (“SD Card”), 

and then push D-pad(Ent).

D-pad

(

)

(Ent)

o

   Push  D-pad(

) to select “Load Setting,” and then 

push D-pad(Ent).

!0

   Push  D-pad(

) to select the ICF file to be loaded, 

and then push D-pad(Ent).

 (

Example: 

Selecting “51P2_USA_160913.icf”)

  • The LOAD FILE screen appears.

!1

   Push  D-pad(

) to select “Repeater List Only,” and 

then push D-pad(Ent).

 

■

Updating the Repeater List (Continued)

Previous view

Summary of Contents for ID-51A






























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands