Icom ID-51A Advanced Manual Download Page 26

Page: 26 / 413

PANEL DESCRIPTION

3-5

BATTERY ICON

➥

Shows the capacity of the attached battery pack
in four levels. (p. 4-2)

Icon

Battery status

The battery has sufficient capacity.
The battery is exhausted a little.
The battery is nearing exhaustion.
The battery is almost fully exhausted.

➥

“

点滅

ᐜ㔞⾲♧

඘㟁⾲♧

” appears when the optional battery case is

attached. (p. 4-4)

VOX ICON

(p. 18-6)

Appears when the optional headset is connected

with the OPC-2006LS

plug

adapter

cable

, and the

VOX function is ON.

OPERATING MODE ICONS

(p. 5-9)

Shows the selected operating mode.

• DV, AM, FM and FM-N are selectable.
• “DV-A” or “DV-G” appears when D-PRS (DV-A) or NMEA

(DV-G) transmission is selected in the DV mode. (p. 10-
31)

EMR/BK/PACKET LOSS/AUTO REPLY ICON

➥

“EMR” appears when the Enhanced Monitor Re-
quest (EMR) mode is selected. (p. 9-8)

➥

“BK” appears when the Break-in (BK) mode is se-
lected. (p. 9-7)

➥

“L” appears when Packet Loss has occurred.

(p. 9-14)

➥

“

” appears when the Automatic Reply function

is selected. (p. 9-11)

DUPLEX ICON

(p. 15-5)

“DUP+” appears when plus duplex is selected, and

“DUP–” appears when minus duplex is selected.

BC RADIO ICON

(p. 6-2)

Appears when the BC radio is ON.

GPS/GPS ALARM ICON

➥

Appears while GPS function is in use. (p. 10-2)

Stays ON when the GPS receiver is activated and

valid position data is received.

Blinks when invalid position data is being re-
ceived.

• GPS icons can be turned OFF in the Menu screen.

(p. 16-33)

➥

“

” blinks instead of the GPS icon, when the

GPS alarm beeps. (p. 10-21)

RECORD ICON

(p. 11-2)

Appears while recording.

• “ ” appears while the transceiver is recording.

• “ ” appears while the recording is paused.

microSD ICON

(Section 2)

➥

“ ” appears when a microSD card is inserted.

➥

“ ” and “ ” alternately blinks while accessing the
microSD card.

AUTO POWER OFF ICON

(p. 16-93)

Appears when the Auto power OFF function is ON.

■

Function display

Single band display

BC Radio setting pop-up

window (Tuning mode)

Dual band display

r y u io !0

Previous view

Summary of Contents for ID-51A






























































































































































































































































































































































































































Search results

Summary of Contents for ID-51A

Reviews:

Brands by name

Popular brands

Icom ID-51A, Advanced Manual

Search results

Summary of Contents for ID-51A

Reviews:

Brands by name

Popular brands