9
D-STAR OPERATION <ADVANCED>
9-7
■
Using the BK function
The BK (Break-in) function allows you to break into a
conversation where the two other stations are commu-
nicating with call sign squelch enabled. (Default: OFF)
NOTE:
The BK function is automatically turned OFF
when the transceiver is turned OFF.
q
After receiving a DV signal, hold down
for 1
second.
• After releasing
, beeps sound, and the calling sta-
tion’s call sign is announced. (RX>CS Speech function)
• The call sign of the calling station or the repeater used is
automatically set.
• When a call sign is not received correctly, error beeps
sound, and no call sign is set.
w
Push [MENU]
.
e
Push D-pad(
) to select the root item (“DV Set”),
and then push D-pad(Ent).
D-pad
(
)
(Ent)
r
Push D-pad(
) to select “BK,” and then push D-
pad(Ent).
t
Push D-pad(
) to select “ON.”
y
Push [MENU]
to exit the MENU screen.
• “BK” appears.
u
When both stations are in standby, push [PTT] to
transmit.
• The TX/RX indicator lights red.
• “BK” blinks on the station that receives the break-in call.
i
Release [PTT] to receive.
Wait for a reply call from the station.
o
After receiving the reply call, communicate normally.
!0
To cancel the BK function, select “OFF” in “BK,” as in
step
t
, or turn OFF the power.
How to use Break-in?
While using digital call sign squelch, the squelch never opens (no audio is heard) even if a call is received, unless
your own call sign is specified.
However, when a call including the “BK ON” signal (break-in call) is received, the squelch will open and audio is
heard, even if the call is intended for another station.
Station B never hears that Station C
is calling Station A.
• Station C calls to Station A with “BK OFF”
Station A and
B are commu-
nicating us-
ing digital call
sign squelch.
Station B also hears that Station C
is calling Station A.
• Station C calls to Station A with “BK ON”
Station A and
B are commu-
nicating us-
ing digital call
sign squelch.
Station A
Station B
Station C
Station A
Station B
Station C
Appears
Previous view
