Icom ID-51A Advanced Manual Download

Page: 288 / 413

MENU SCREEN

16-33

GPS Indicator

(Default: ON)

GPS > GPS Set > GPS Indicator

Select whether or not to display the GPS icon(

• OFF: The GPS icon is not displayed.
• ON: The GPS icon appears

when valid position data is received, and

blinks when no position data is received.

Selected GPS

receiver

Not connected

Connected/

Searching

Connected/

Received

Internal GPS

–

Blinks

Appears

External GPS

Not displayed

Blinks

Appears

*No icon appears when “Manual” is selected in the GPS select item.

GPS Out (To DATA Jack)

(Default: OFF)

GPS > GPS Set > GPS Out (To DATA)

Select whether or not GPS information from either the internal or external
GPS receiver is output at the [DATA] jack.

TIP:

No data is output when “OFF” or “Manual” is selected in the GPS Se-

lect item.
Select “OFF” when you want to operate the data communication. (p. 9-14)

■

GPS items (Continued)

Previous view

Summary of Contents for ID-51A






























































































































































































































































































































































































































Search results

Summary of Contents for ID-51A

Reviews:

Related manuals for ID-51A

Brands by name

Popular brands

Icom ID-51A, Advanced Manual

Search results

Summary of Contents for ID-51A

Reviews:

Related manuals for ID-51A

Brands by name

Popular brands