manualshive.com logo in svg

Icom ID-51A, Advanced Manual

Share
Download
Icom ID-51A Advanced Manual Download Page 348

16

MENU SCREEN

16-93

GPS Time Correct 

(Default: Auto)

Time Set > GPS Time Correct 

This function can correct its time by using the time information that a GPS 
sentence contains.
It is corrected by calculating the received UTC (Universal Time of Coordi-
nated) time and the set [UTC Offset].
• OFF:   The function is OFF.
• Auto:  The function is ON.

UTC Offset 

(Default: ±0:00)

Time Set > UTC Offset 

Set the time difference between UTC (Universal Time Coordinated) and the 
local time to between –14:00 and +14:00 in 00:05 steps.

Auto Power OFF 

(Default: OFF)

Time Set > Auto Power OFF 

This function automatically turns OFF the power after no operation has not 
been performed for the preset time.
• OFF: 

Turns the function OFF.

• 30 ~ 120 min:   Select the desired Auto Power OFF time between 30, 60, 90 

and

 

120 minutes.

 

■

Time set items (Continued)

Previous view

Summary of Contents for ID-51A






























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands