![background image](http://html1.mh-extra.com/html/icom/id-51a/id-51a_advanced-manual_2038182370.webp)
17
OTHER FUNCTIONS
17-16
■
Tone squelch operation
D
DTCS code setting and operation (Continued)
i
Push [MENU]
to exit the MENU screen.
o
Push [QUICK]
.
!0
Push D-pad(
) to select “TONE,” and then push D-
pad(Ent).
D-pad
(
)
(Ent)
!1
Push D-pad(
) to select the tone squelch type.
• DTCS
S
: Enables the DTCS squelch with the Pocket
Beep function.
• DTCS:
Enables the DTCS Squelch function.
• DTCS-R: Enables the Reverse DTCS Squelch function.
• DTCS(T): (“DTCS” blinks)
When you transmit, the selected DTCS code
is superimposed on your normal signal.
When you receive, the function is OFF.
• TONE(T)/DTCS(R): (“T-DTCS” appears, and “T” blinks.)
When you transmit, the selected subaudible
tone is superimposed on your normal signal.
When you receive, the DTCS squelch opens
only for a signal that includes a matching
DTCS code and polarity. (Audio is heard)
• DTCS(T)-TSQL(R): (“D-TSQL” appears, and “D” blinks.)
When you transmit, the selected DTCS code
is superimposed on your normal signal.
When you receive, the tone squelch opens
only for a signal that includes a matching
tone frequency. (Audio is heard)
!2
Push D-pad(Ent) to set the DTCS squelch function,
and then close the QUICK Menu screen.
!3
Holding down [PTT] and call a desired station.
• Operate in the normal way.
Continued from step
u
on the previous page.
Appears.
• When reversed tone
squelch is selected
in step
!
1
, “DTCS-R”
icon appears.
TIP: Sounds beep when a call is received.
If “DTCS
S
” is selected in step
!1
, beeps sound
for 30 seconds and the icon “
S
” blinks when a call
with the matched DTCS code signal is received.
➥
After receiving a call, hold down [PTT] within
30 seconds then start conversation, or push
D-pad(Ent) to cancel the pocket beep function
(“
S
” icon disappears). After that, the transceiv-
er selects regular DTCS squelch operation. If no
operation is performed within 30 seconds, beeps
stop sounding but the “
S
” icon blinking remains.
Beep,
Beep,
Beep...
When a call with “TSQL
S
”
is received.
Previous view