background image

8

D-STAR OPERATION <BASIC>

8-2

 When you know your access repeater

From the Repeater List (p. 8-3)

Select the repeater in your transceiver’s Repeater 
List.

 When you don't know which repeater you can access.

 When the “FROM” data is stored in the TX History.

Setting from the TX History (p. 8-7)

When you transmit using the DR function, “FROM” 
(the access repeater) data is stored in the TX History.
You can select the access repeater from the record.

Search for a repeater using the DR scan (p. 8-4)

The Normal DR scan searches for output re-
peater frequencies. The scan will stop when 
a signal is detected.

• The scan will also stop on simplex signals.

The Near Repeater scan searches for near-
by repeaters by using your location and the 
repeater’s location that is entered in the Re-
peater List, and then lists them.
You can also find only FM repeaters using 
the Near Repeater (FM) scan.

Search for the nearest repeater (p. 8-5)

Searches for the nearest repeater by us-
ing your location and the repeater’s location 
where entered in the Repeater List.
The nearest repeaters in your transceiver’s 
Repeater List are displayed as selectable 
choices.
 You can select the desired nearby repeater 

type (DV or FM).

Your access repeater must be set in “FROM” when you 
transmit using the DR function.
You have four ways to set the access repeater.
Click the title shown below to jump to the specified 
page.

 

Setting “FROM” (Access repeater)

“Hirano” repeater 
is set in “FROM.”

Blinks

While selecting a scan item

While scanning

Selecting a repeater type

Previous view

Summary of Contents for ID-51A






























































































































































































































































































































































































































Reviews: