Icom ID-51A Advanced Manual Download

Page: 271 / 413

MENU SCREEN

16-16

■

DUP/TONE items

Offset Freq

(Default: 0.600.00*)

DUP/TONE... > Offset Freq

Set the frequency offset for duplex (repeater) operation to between 0 and
59.99500 MHz.

• The selected tuning step in the VFO mode is used when setting the offset.
• Push [V/MHz]

to select 1 MHz or 10 MHz steps.

• The duplex shift direction (DUP-/DUP+) is set in the QUICK MENU screen.

(p. 15-5)

The default value may differ, depending on the frequency band (selected

as the Main band before entering the Menu screen) and the transceiver
version.

Repeater Tone

(Default: 88.5)

DUP/TONE... > Repeater Tone

Select subaudible tone frequencies, for repeater access and other functions.
50 tone frequencies (67.0~254.1 Hz) are selectable.

TSQL Freq

(Default: 88.5)

DUP/TONE... > TSQL Freq

Select the tone frequency for the tone squelch or pocket beep. 50 frequen-
cies (67.0~254.1 Hz) are selectable.

• Selectable repeater tone/tone squelch frequencies

(Unit: Hz)

67.0
69.3
71.9
74.4
77.0
79.7
82.5

85.4

88.5

91.5

94.8

97.4

100.0
103.5

107.2
110.9
114.8
118.8
123.0
127.3
131.8

136.5
141.3
146.2
151.4
156.7
159.8
162.2

165.5
167.9
171.3
173.8
177.3
179.9
183.5

186.2
189.9
192.8
196.6
199.5
203.5
206.5

210.7
218.1
225.7
229.1
233.6
241.8
250.3

254.1

TIP:

The transceiver has 50 tone frequencies and consequently their spac-

ing is narrow compared with units having 38 tones. Therefore, some tone
frequencies may receive interference from adjacent tone frequencies.

Previous view

Summary of Contents for ID-51A






























































































































































































































































































































































































































Search results

Summary of Contents for ID-51A

Reviews:

Related manuals for ID-51A

Brands by name

Popular brands

Icom ID-51A, Advanced Manual

Search results

Summary of Contents for ID-51A

Reviews:

Related manuals for ID-51A

Brands by name

Popular brands