Icom ID-51A Advanced Manual Download Page 261

Page: 261 / 413

MENU SCREEN

16-6

NOTE:

The default settings shown below are for the USA version.

The default settings may differ, depending on your transceiver version.

■

Menu items and Default settings (Continued)

BC Radio Memory

BC Radio Set

Auto Mute

In this item, set the Broadcast (BC) Radio options.

OFF, 0sec~

2sec

~10sec

OFF or

BC Radio

DESCRIPTIONS

RANGE OR VALUE (Default is shown in bold)

Turns the Power Save (BC Radio) func-
tion ON (to save battery power) or OFF.

Sets the timer to temporarily mute the
BC Radio audio when receiving signals
on the operating band.

Shows the BC Radio memory contents.

<<BC Radio ON>>/<<BC Radio OFF>>

<<BC Radio Mode>>

Power Save (BC Radio)

Turns the BC Radio ON or OFF.

Selects the BC Radio Mode with the
transceiver in the Sleep mode.

FM Antenna

External

or Earphone

Selects the desired antenna for FM.

Previous view

Summary of Contents for ID-51A






























































































































































































































































































































































































































Search results

Summary of Contents for ID-51A

Reviews:

Related manuals for ID-51A

Brands by name

Popular brands

Icom ID-51A, Advanced Manual

Search results

Summary of Contents for ID-51A

Reviews:

Related manuals for ID-51A

Brands by name

Popular brands