Icom ID-51A Advanced Manual Download

Page: 55 / 413

BC RADIO OPERATION

6-7

■

Basic operation (Continued)

Setting the squelch level

The squelch level can be set for only the BC radio.

While holding down [SQL], rotate [DIAL] one click to
display the squelch level. (Default: AUTO)

While holding down [SQL], rotate [DIAL] to select the
squelch level.

• “LEVEL1” is loose squelch (for weak signals) and “LEV-

EL3” is tight squelch (for strong signals).

• “AUTO” shows automatic level adjustment by a noise

pulse counting system.

• “OPEN” shows a continuously open setting.

[DIAL]

[SQL]

Using the Monitor function

This function is used to listen to weak BC Radio sig-
nals without disturbing the squelch setting, or having to
manually open the squelch.

➥

Hold down [SQL] to monitor the operating frequen-
cy.

• The 1st segment of the S-meter blinks.

[SQL]

When “AUTO” is selected.

When Level 3 (Maximum)
is selected.

Blinks

TIP:

The [SQL] key can be set to ‘sticky’ operation in

Function menu.
(MENU > Function >

Monitor

) (p. 16-73)

Previous view

Summary of Contents for ID-51A






























































































































































































































































































































































































































Search results

Summary of Contents for ID-51A

Reviews:

Related manuals for ID-51A

Brands by name

Popular brands

Icom ID-51A, Advanced Manual

Search results

Summary of Contents for ID-51A

Reviews:

Related manuals for ID-51A

Brands by name

Popular brands