Icom ID-51A Advanced Manual Download

Page: 28 / 413

PANEL DESCRIPTION

3-7

■

Function display (Continued)

Dual band display

Single band display

BC Radio setting pop-up

window (Tuning mode)

PRIORITY WATCH ICON

(p. 14-5)

Appears when Priority Watch is in use.

WEATHER ALERT ICON

(p. 5-14)

Appears when the Weather alert function is ON.

ATTENUATOR ICON

(p. 5-12)

Appears when the attenuator is ON in the AIR band.

SKIP ICON

(pp. 13-7, 13-8)

➥

“ SKIP” appears when the selected memory chan-

nel is set as a Skip channel.

➥

“ PSKIP” appears when the displayed frequency

is set as a Skip frequency in the Memory mode.

➥

“ PSKIP” appears while the Frequency Skip Scan

function is ON in the VFO mode.

MEMORY CHANNEL NUMBER

➥

Displays the selected memory channel or bank
number. (p. 12-3)

➥

“C0” to “C3” appears when the Call channel is se-
lected. (p. 12-3)

MEMORY ICON

(p. 12-3)

Appears when the Memory mode is selected.

S/RF METER

➥

Shows the relative signal strength of the receive
signal.

➥

Shows the output power level of the transmit signal.
(p. 5-11)

POWER ICONS

(p. 5-11)

➥

“ SLO” appears when S-low power is selected.

➥

“ LO1” appears when low 1 power is selected.

➥

“ LO2” appears when low 2 power is selected.

➥

“ MID” appears when mid power is selected.

➥

No icon appears when high power is selected.

MEMORY NAME DISPLAY

(p. 12-12)

While in the Memory mode, the programmed mem-

ory or memory bank name is displayed.

FREQUENCY READOUT

Displays a variety of information, such as the operat-

ing frequency, menu contents and so on.

• The decimal point blinks during a scan.

MAIN BAND ICON

(p. 5-3)

Shows the selected band (A or B) is the Main band.

➥

Shows the selected band (A or B) is the Main
band.

➥

“ TM” appears while in the Terminal mode.

➥

“ AP” appears while in the Access Point mode.

TIP:

See “About the DV Gateway function” that can be

downloaded from the Icom website, for details.

!6
!7

Previous view

Summary of Contents for ID-51A






























































































































































































































































































































































































































Search results

Summary of Contents for ID-51A

Reviews:

Related manuals for ID-51A

Brands by name

Popular brands

Icom ID-51A, Advanced Manual

Search results

Summary of Contents for ID-51A

Reviews:

Related manuals for ID-51A

Brands by name

Popular brands