manualshive.com logo in svg

Icom ID-51A, Advanced Manual

Share
Download
Icom ID-51A Advanced Manual Download Page 257

16

MENU SCREEN

16-2

 

■

Menu item selection

The MENU system is used to enter infrequently 
changed values or function settings. In addition to this 
page, see pages 16-4 through 16-15 for details of each 
item.

Enters/
Exits the 
Menu 
screen.

Goes back 
a level

Return to 
the default 
setting

Moves selector up

Moves selector down

Goes to the 
previous level

Goes to the 
next level

Set

NOTE:

 The Menu system is constructed in a tree 

structure. You may go to the next tree level, or go back 
a level, depending on the selected item.

Previous view

Summary of Contents for ID-51A






























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands