manualshive.com logo in svg

Icom ID-51A, Advanced Manual

Share
Download
Icom ID-51A Advanced Manual Download Page 54

6

BC RADIO OPERATION

6-6

 

■

Basic operation (Continued)

 

D

Using the Attenuator function

The attenuator reduces signal levels to prevent audio 
distortion.
This is useful when the transceiver receives a very 
strong AM or FM BC Radio signal, or it is in very strong 
electromagnetic fields, such as from a broadcasting 
station near your location.
The attenuator can be set in both the AM and FM 
modes.

 

q

 Push  [MODE]

 to select the desired AM or FM 

mode.

 

w

Push [QUICK]

.

 

e

 Push  D-pad(

) to select “ATT (FM),” and then push 

D-pad(Ent).

  •  When the AM mode is selected in step 

q

, select “ATT 

(AM).”

D-pad

(

)

(Ent)

 

r

 Push  D-pad(

) to select the attenuator.

  • ATT (FM)

    OFF:  The attenuator is OFF.
    30dB: The attenuation is about 30 dB.

  • ATT (AM)

    OFF:  The attenuator is OFF. 
    Auto:   The attenuation is automatically switched be-

tween OFF and 30 dB (maximum), depend-
ing on the received signal strength level. 

    30dB: The attenuation is set to 30 dB. 
    50dB: The attenuation is set to 50 dB. 

 

t

 Push D-pad(Ent) to save and exit the Quick Menu 
screen.

  •  When the attenuator is ON, “ATT” appears in the BC Ra-

dio pop up window.

Appears

Previous view

Summary of Contents for ID-51A






























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands