![background image](http://html1.mh-extra.com/html/icom/id-51a/id-51a_advanced-manual_2038182128.webp)
9
D-STAR OPERATION <ADVANCED>
9-33
■
Entering information into Repeater List
D
New repeater entry (Continued)
12. Setting the Position data accuracy level
When the Repeater Search function is not used, or
the distance between your position and a repeater is
not displayed, select “OFF.”
$7
Push D-pad(
) to select “POSITION,” and then push
D-pad(Ent).
D-pad
(
)
(Ent)
$8
Push D-pad(
) to select the position data accuracy
level.
• None:
Select when the repeater has no position
data.
• Approximate: Select when the entered position data is
approximate.
• Exact:
Select when the entered position data is
exactly correct.
$9
After setting, push D-pad(Ent).
13. Entering the latitude
This item appears only when “Approximate” or “Exact”
is selected in [12. Setting the Position data accuracy
level].
%0
Push D-pad(
) to select “LATITUDE,” and then push
D-pad(Ent) to enter the latitude data edit mode.
• A cursor appears and blinks.
%1
Rotate [DIAL] to enter the latitude.
%2
Push to move the cursor backward, or push to
move the cursor forward.
%3
Repeat steps
%1
and
%2
to enter the latitude.
%4
After entering, push D-pad(Ent).
14. Entering the longitude
This item appears only when “Approximate” or “Exact”
is selected in [12. Setting the Position data accuracy
level].
%5
Push D-pad(
) to select “LONGITUDE,” and then
push D-pad(Ent) to enter the longitude data edit
mode.
• A cursor appears and blinks.
%6
Rotate [DIAL] to enter the longitude.
%7
Push to move the cursor backward, or push to
move the cursor forward.
%8
Repeat steps
%6
and
%7
to enter the longitude.
%9
After entering, push D-pad(Ent).
☞
Continued on the next page.
Previous view