manualshive.com logo in svg

Icom ID-51A, Advanced Manual, Page: 346 / 413

Share
Download
Icom ID-51A Advanced Manual Download Page 346

16

MENU SCREEN

16-91

 

■

Sounds items (Continued)

Sub Band Mute 

(Default: OFF)

Sounds > Sub Band Mute 

Select whether or not to mute the SUB band audio signal while receiving on 
the MAIN band, and/or sound a beep when a signal disappears on the SUB 
band.
• OFF: 

Disables the SUB band mute function.

• Mute: 

 While receiving on the MAIN band, the SUB band audio sig-
nal is muted.

• Beep: 

 When a signal disappears on the SUB band, a beep 
sounds.

 

 The beep sounds even if no signal is received on the MAIN 
band.

• Mute & Beep:   While receiving on the MAIN band, the SUB band audio sig-

nal is muted.

 

 While receiving on the SUB band, and a signal disappears, 
a beep sounds.

 

-  The beep sounds even if no signal is received on the MAIN 

band.

Scope AF Output 

(Default: ON)

Sounds > Scope AF Output 

Select the audio output option during a sweep by the Band Scope function.

• OFF:   No audio is heard during the sweep.
• ON:  The audio is heard during the sweep.

Previous view

Summary of Contents for ID-51A






























































































































































































































































































































































































































Reviews:

No comments