![background image](http://html.mh-extra.com/html/icom/i9100/i9100_instruction-manual_611948209.webp)
200
20
OPTIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
CT-17
ci
-
v
level
converter
unit
For remote transceiver control using a
personal computer equipped with an
RS-232C port. You can change fre
-
quencies, operating mode, memory
channels, etc., via your computer.
•
AG-25
weather
-
proof
preamplifier
(for 144 MHz Band)
•
AG-35
weather
-
proof
preamplifier
(for 430 MHz Band)
External all-weather, mast mounting preamplifiers for com-
pensating for coaxial cable loss.
•
AG-2400
down
converter
unit
All-weather, satellite down converter with superior NF and
gain.
Input frequency : 2400–2402 MHz
Output frequency : 144–146 MHz
Conversion gain : More than 25 dB
Total NF
: Less than 1.5 dB
•
OPC-1529R
data
communication
cable
(RS-232C type)
Allows low-speed data communication in the DV mode, and
receiving a GPS data from a third-party GPS receiver.
•
OPC-599
adapter
cable
13-pin, ACC connector to 7-pin + 8-pin ACC connector.
• MB-123
carrying
handle
Convenient when carrying the transceiver.
The same as that attached with the transceiver.
•
UT-121
digital
unit
Allows the DV mode operation with the IC-9100.
•
CS-9100
cloning
software
Use this software to program settings, memory channels
and set mode contents quickly and easily via your PC’s
USB port.
A USB cable is required. (A-B type, purchase separately)
• RS-BA1
ip
remote
control
software
To remotely control radios using the RS-BA1,
BE SURE
that you comply with your local regulations.
Approved Icom optional equipment is designed for
optimal performance when used with an Icom trans-
ceiver.
Icom is not responsible for the destruction or damage
to an Icom transceiver in the event the Icom trans-
ceiver is used with equipment that is not manufac-
tured or approved by Icom.