![background image](http://html.mh-extra.com/html/icom/i9100/i9100_instruction-manual_611948016.webp)
#8
VFO/MEMORY SWITCH [VFO/MEMO]
➥
Push to switch between the VFO and memory
modes. (pp. 34, 139)
➥
Hold down for 1 second to copy the memory con-
tents to the displayed VFO on the MAIN Band.
(p. 142)
#9
MEMO PAD-WRITE SWITCH [MP-W] (p. 144)
Push to write the displayed data into a memo pad.
• The 5 most recent entries remain in the memo pads.
• The memo pad capacity can be extended from 5 to
10 in the “Memopad Numbers” item of the Set mode.
(p. 164)
$0
MEMORY WRITE SWITCH [MW] (p. 140)
Hold down for 1 second to store VFO data into the
selected memory channel.
• This can be done in both the VFO and memory modes.
$1
MEMO PAD-READ SWITCH [MP-R] (p. 144)
Push to sequentially call up the contents from the
memo pads.
The 5 (or 10) most recently programmed frequen-
cies and operating modes can be recalled, starting
from the most recent.
• The memo pad capacity can be increased from 5 to
10 in the “Memopad Numbers” item of the Set mode.
(p. 164)
$2
MEMORY CLEAR SWITCH [M-CLR] (p. 141)
In the Memory mode, hold down for 1 second to
clear the memory channel.
• The channel becomes a blank channel.
•
This switch is disabled in the VFO mode.
$3
TUNING STEP•REPEATER GROUP SWITCH
[TS•GRP]
TUNING STEP SWITCH Operation
(p. 38)
➥
Push to toggle between the kHz and MHz* quick
tuning step, or turn OFF the quick tuning.
* When the HF/50 MHz frequency band is selected,
MHz step cannot be selected.
• When the “
Z
” quick tuning icon is displayed above
the kHz or MHz digit, the frequency is changed in
programmed quick tuning steps or 1 MHz steps.
• When the quick tuning is OFF, the frequency is
changed in 10 Hz steps.
➥
When the quick tuning is ON, hold down for
1 second to display the “TS” screen (Tuning Step)
to select the quick tuning step. (p. 38)
• 0.1, 1, 5, 6.25, 9, 10, 12.5, 20, 25, 50 and 100 kHz
steps are independently selectable for each operat-
ing mode.
➥
When the quick tuning is OFF, hold down for
1 second to turn the minimum tuning step of
1 Hz ON or OFF. (p. 39)
CALL SIGN GROUP SWITCH Operation
(p. 93)
(Mode: DV)
(Only when “
” is displayed.)
➥
Push to switch the call sign group.
➥
Hold down for 1 second to enter the repeater call
sign group selection mode.
• “
≈
” blinks.
➥
When in the repeater group selection mode,
push to cancel it.
■
Front panel (continued)
7
1
PANEL DESCRIPTION
$6
$4
$3
#8 #9$0 $1 $2
$7
$8
$9
%0
$5