![background image](http://html.mh-extra.com/html/icom/i9100/i9100_instruction-manual_611948148.webp)
139
10
MEMORY OPERATION
■
Memory channel selection
When the SUB Band setting is turned ON, you can se-
lect a Memory channel in the SUB Band as well as in
the MAIN Band. (p. 33)
• “
” appears when the SUB Band setting is ON.
D
Selection in the VFO mode
q
Push [VFO/MEMO] to select the VFO mode.
w
Rotate [M-CH] to select a Memory channel num-
ber.
• Rotate clockwise to select a higher Memory channel
number; rotate counterclockwise to select a lower Mem
-
ory channel number.
• All Memory channels, including blank channels, can be
selected.
• “
” appears when no information has been pro-
grammed into the Memory channel. (Blank channel)
e
Push [VFO/MEMO] to select the Memory mode.
• “MEMO” and contents of the Memory channel appear.
D
Selection in the Memory mode
q
Push [VFO/MEMO] to select the Memory mode.
w
Rotate [M-CH] to select a Memory channel.
• Rotate clockwise to select a higher Memory channel
number; rotate counterclockwise to select a lower Mem
-
ory channel number.
• All Memory channels, including blank channels, can be
selected.
• “
” appears when no information has been pro-
grammed into the Memory channel. (Blank channel)
• Memory channels can also be selected using the micro
-
phone [UP]/[DN] keys. In such case, the blank channels
are skipped.
[VFO/MEMO]
[M-CH]
A G C
D U P
C O M P
T B W
S C P
M 1
While in the VFO mode
Appears if the selected Memory
channel has no information.
A G C
D U P
C O M P
T B W
S C P
M 1
While in the Memory mode
■
Call channel selection
Each frequency band has its own Call channel. Fac-
tory default frequency and operating modes are pro-
grammed into the Call channel. Change these to suit
your operating needs. (see page 141)
q
Push [CALL•GPS] to select the Call channel.
• A capital “C” appears.
w
Push [CALL•GPS] again to return to the previous
screen display.
[CALL•GPS]
A G C
D U P
A F C
T O N
S C P
M 1
Appears