![background image](http://html.mh-extra.com/html/icom/i9100/i9100_instruction-manual_611948112.webp)
103
8
DV MODE OPERATION
■
Calling a specific station
This section describes how to call a specific station
using the DR mode.
When the Link repeater (R2) is set to “GW,” the des-
ignated gateway repeater is automatically set as the
Link repeater, and you can make a call to a specific
station through the internet.
q
Set your own call sign.
w
Hold down [DV
•
DR] for 1 second to select the DR
mode.
•
The last used access repeater is displayed.
- If the displayed frequency band on the SUB Band is
the same as that of the last used access repeater, se-
lecting the DR mode on the MAIN Band will automati-
cally move the frequency band on the SUB Band to
the Main Band display, and turn OFF the SUB Band
display.
e
Rotate [MAIN DIAL] to select the desired access
repeater.
• Only the repeaters
, whose “R1USE” setting is set to
YES, or Access repeater scan targets
are displayed.
(pp. 90, 100)
r
Push [UR](F-4) to enter the UR call sign selection
mode.
t
Rotate [MAIN DIAL] to select a individual station
call sign.
• First selecting the
station call sign memory groups
(U01–U99)
by pushing [TS•GRP] makes it more conve
-
nient.
y
Hold down [UR](F-4) for 1 second to enter the Link/
Gateway repeater (R2) selection mode.
Making a call to an individual station through your
local area (access) repeater (Local Area call)
MY call sign
:
JA3YUA
Station call sign
:
JG3YMK
Repeater
q
:
NARA43
(JP3YHL)
q
w
e
r
Area
Zone
u
Rotate [MAIN DIAL] to select “NOT USE
✱
.”
i
Push [UR](F-4) to exit the Link repeater (R2) selec-
tion mode.
o
Push [PTT] on the microphone to transmit. (or
[TRANSMIT] on the transceiver)
• The MAIN Band TX/RX indicator lights red.
!0
Release [PTT] to receive. (or push [TRANSMIT]
again)
If you want to save this temporary setting, push [MW]
to enter the memory select write mode. (p. 102)
[MAIN DIAL]
[D
V•DR]
[TS•GRP]
[UR
]
NOT USE
✱
CS
C D
R > C S
U R
DSET
D1
R
2
: N O T U S E
�
[TRANSMIT]
[UR]
[MW]
[MAIN DIAL]
MAIN Band TX/RX indicator