![background image](http://html.mh-extra.com/html/icom/i9100/i9100_instruction-manual_611948026.webp)
17
1
PANEL DESCRIPTION
■
LCD display (Continued)
@2
@1
@3
@4
@6
@5
@7
#1
@4
@3
@2
@9
@8
#0
@1
SPLIT ICON (p. 82)
Appears when the Split function is turned ON.
@2
DSP FILTER ICON (p. 73)
Displays the selected IF filter.
@3
AGC ICONS (p. 72)
Displays the selected AGC time constant.
• “ ” for AGC fast; “ ” for AGC middle; “ ” for AGC slow;
“-OFF” for AGC OFF.
• In the FM and DV mode, “
” for AGC fast is fixed.
@4
PREAMP ICON (p. 71)
Appears when a preamplifier is turned ON.
• In HF/50 MHz frequency band, either “P. AMP
” or
“P. AMP ” is displayed when the preamp 1 or preamp 2
is ON.
@5
GPS DATA COMMUNICATION ICON
Appears while the GPS data communication func-
tion is selected in the “GPS Out” item of the Set
mode. (p. 168).
• A GPS data from the GPS receiver, which is connected
to the [DATA1] jack, is output to the [USB] port.
@6
GPS TX ICON (p. 134)
➥
“GPS” appears when the GPS transmission
mode is set to GPS.
➥
“GPS-A” appears when GPS transmission mode
is set to GPS-A.
@7
GPS ICON (p. 132)
➥
Appears when a valid position data is received
from a GPS receiver that is connected to the
[DATA1] jack.
➥
Blinks when an invalid data is received from the
GPS receiver.
@8
GPS ALARM ICON (p. 130)
Appears when the GPS alarm function is turned
ON.
@9
BREAK-IN ICON
(p. 79)
➥
“
F
BK-IN” appears when the Full Break-in func-
tion is turned ON.
➥
“BK-IN” appears when the Semi Break-in func-
tion is turned ON.
#0
MONITOR ICON (p. 81)
Appears when the Monitor function is turned ON.
#1
SUB ICON
(p. 33)
Appears when the SUB Band setting mode is ON.