![background image](http://html.mh-extra.com/html/icom/i9100/i9100_instruction-manual_611948143.webp)
134
9
GPS/GPS-A OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
GPS Auto TX
11.
(Default: OFF)
Select the desired interval from OFF, 5, 10, 30 sec-
onds, 1, 3, 5, 10 or 30 minutes for automatic position
data transmission.
The current position data, received from a GPS re-
ceiver, is transmitted at the selected interval when
“GPS” or “GPS-A” is selected as the “GPS TX Mode”
option as described below.
The GPS message is transmitted as well as the posi-
tion data, if it is programmed.
Even if this setting is set to OFF, you can manually
transmit the position data by pushing [TRANSMIT] or
[PTT] (microphone).
NOTE:
• When four GPS sentences are selected at the
same time, “5sec” cannot be selected.
• When “Manual” is selected in “My Position,” the
current position data will not be automatically
transmitted.
GPS TX Mode
12.
(Default: Disable)
Select the GPS or GPS-A operating mode to transmit
the position data from a GPS receiver, or turn OFF the
function.
NOTE:
When “GPS” or “GPS-A” is selected, low-
speed data communication cannot be used.
GPS Sentence (RMC)
13.
*
1
(Default: OFF)
Turn the GPS sentence formatter “RMC” ON or OFF.
GPS Sentence (GGA)
14.
*
1
(Default: ON)
Turn the GPS sentence formatter “GGA” ON or OFF.
GPS Sentence (GLL)
15.
*
1
(Default: OFF)
Turn the GPS sentence formatter “GLL” ON or OFF.
GPS Sentence (GSA)
16.
*
1
(Default: OFF)
Turn the GPS sentence formatter “GSA” ON or OFF.
GPS Sentence (VTG)
17.
*
1
(Default: OFF)
Turn the GPS sentence formatter “VTG” ON or OFF.
GPS Sentence (GSV)
18.
*
1
(Default: OFF)
Turn the GPS sentence formatter “GSV” ON or OFF.
NOTE for GPS sentences:
• Up to four GPS sentences are usable at the same
time.
• See page 122 for GPS sentence setting details.
Unproto Address
19.
*
2
(Default: API910,DSTAR
✱
)
Enter an unproto address of up to 56 characters. The
manually programmed data can be memorized.
• Unproto address programming
q
Push [EDT](F-4) to enter the unproto address edit
mode.
w
Push [F-1] one or more times to select the desired
character type.
Character type
Selectable characters
ABC
A to Z
abc
a to z
etc
! # $ % & \ ?
" ’ ` ^ + –
✱
⁄ . , : ; = < >
( ) [ ] { } ¦ _ ¯ @
e
Rotate [MAIN DIAL] to select the first character or
symbol to input.
• When entering number or a decimal point, push the ap
-
propriate keypad key.
• Push [DEL](F-4) to delete the selected character, sym
-
bol or number.
• Push [SPC](F-5) to input a space.
• When all 56 characters have been
programmed, an
error beep sounds. If you want to reprogram, push [
Ω
]
(F-2) or [
≈
](F-3) to select a character, then push [DEL]
(F-4) to delete it.
r
Push [
Ω
](F-2) to move the cursor backward, or push
[
≈
](F-3) to move the cursor forward.
t
Repeat steps
w
through
r
to program an unproto
address of up to 56 characters.
y
Push [MENU] to save the unproto address, and re-
turn to the “SET” screen.
*
1
Appears when “GPS” is selected in “GPS TX Mode.”
*
2
Appears when “GPS-A” is selected in “GPS TX Mode.”