![background image](http://html.mh-extra.com/html/icom/i9100/i9100_instruction-manual_611948039.webp)
30
2
INSTALLATION AND CONNECTIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
■
Microphone connector information
(Front panel view)
y
GND (PTT ground)
t
PTT
r
Main band’s squelch switch
q
Microphone input
w
+8 V DC output
e
Frequency up/down
i
Main band’s AF output
(varies with [AF])
GND
(Microphone ground)
u
[MIC]
Pin No.
FUNCTION
DESCRIPTION
w
+8 V DC output
Max. 10 mA
e
Frequency up
Ground
Frequency down
Ground through 470
˘
r
Squelch open
“Low” level
Squelch closed
“High” level
CAUTION: DO NOT
short pin 2 to ground as this
can damage the internal 8 V regulator. DC voltage
is applied to pin 1 for microphone operation. Use
caution when using a non-Icom microphone.
■
Microphones
D
HM-36
q
w
q
w
r
e
D
SM-50 (Option)
q
w
q
w
r
e
q
UP/DOWN SWITCHES [UP]/[DN]
Push to change the frequency or memory channel.
• While holding down, the frequency or memory channel
number continuously increases or decreases.
• While in the split frequency mode, and holding down
[XFC], push to change the transmit frequency.
• The [UP]/[DN] switch can be used as a key paddle if
the “MIC Up/Down Keyer” item setting is “ON” in the
Keyer Set mode. In such case, the frequency and mem-
ory channel cannot be changed using the [UP]/[DN]
switches. (p. 55)
• You can set the dot-dash polarity of the [UP]/[DN] switch
in the “Paddle Polarity” item of the Keyer Set mode.
When “Normal” is selected, [UP] sends a dash, and
[DN] sends a dot. (p. 55)
w
PTT SWITCH
Hold down to transmit; release to receive.
e
PTT LOCK SWITCH (available on only the SM-50)
Push to toggle between transmit and receive.
r
LOW CUT SWITCH (available on only the SM-50)
Push to cut out the low frequency components of
input voice signals.