![background image](http://html.mh-extra.com/html/icom/i9100/i9100_instruction-manual_611948133.webp)
124
9
GPS/GPS-A OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
D
GPS automatic transmission
In the DV mode, this function automatically transmits
the GPS receiver’s current position data, at a selected
interval.
When a GPS message is programmed, the transceiver
transmits it along with the position data. See page 125
for the GPS message programming.
q
Hold down [CALL/GPS] for 1 second to display the
“GPS” screen.
w
Push [SET](F-5) to enter the GPS Set mode.
e
Push [
Y
](F-1) or [
Z
](F-2) to select “GPS Auto TX.”
r
Rotate [MAIN DIAL] to select the desired position
data transmitting interval to 5*, 10 or 30 seconds; 1,
3, 5, 10 or 30 minutes, or OFF.
* If four GPS sentences are selected in GPS Set mode on
page 122, “5 sec.” cannot be selected.
• The GPS message is also transmitted, if programmed.
t
Push [MENU] to save, and return to the “GPS”
screen.
NOTE:
• Your own call sign must be entered to activate the
GPS automatic transmission. (p. 93)
•
Use GPS automatic transmission in only the sim-
plex mode.
•
GPS automatic transmission through a repeater
may interfere with other communications.
[SET]
[CALL/GPS]
[MAIN DIAL]
[MENU]
[
∫
] [
√
]
OFF (default)
Ù
1 1
Ú
O F F
S E T
G P S A u t o T X
q
Hold down [CALL/GPS] for 1 second to display the
“GPS” screen.
w
Push [POS](F-1), then push [F-2] once or twice to
display your own or the caller’s (other station) posi-
tion information.
• You cannot save the data on the “GPM Position”
screen.
e
Hold down [F-5] for 1 second to save the position
data to GPS memory (G00).
• The Memory channel number advances automatically if
the next Memory channel already contains information.
• 50 GPS Memory channel are available.
D
Display the Grid Locator information
The Grid Locator expresses the latitude and longitude
position data in a short string of characters. The IC-
9100 can display it on the LCD.
q
Hold down [CALL/GPS] for 1 second to display the
“GPS” screen.
w
Push [POS](F-1), then push [F-2] one or more times
to display the position information.
e
While holding down [F-4], the grid locator informa-
tion is displayed.
M
3 5 ˚ 4 5 . 0 0 ’ N
1 3 5 ˚ 3 6 . 0 0 ’ E G L : P M 7 5 T S
Hold down
[POS]
[CALL/GPS]
[F-5]
[F-2]
D
Saving your own or received position data