![background image](http://html.mh-extra.com/html/icom/i9100/i9100_instruction-manual_611948024.webp)
■
LCD display
!2
!0
q
t
w
q
r
w
e
y
y
o
o
!1
u
i
!0
u
i
15
1
PANEL DESCRIPTION
q
FREQUENCY READOUTS
Displays the operating frequency.
• When the quick tuning icon “
Z
” is displayed, the fre-
quency changes in pre-set kHz or 1 MHz quick tuning
steps. (p. 38)
• When the quick tuning icon “
Z
” is not displayed, the fre-
quency changes in 10 Hz or 1 Hz steps. (pp. 37, 39)
w
MULTI-FUNCTION METER INDICATION
➥
Displays the signal strength while receiving.
➥
Displays the relative output power, SWR, ALC or
compression levels while transmitting.
➥
When the Meter Peak Hold function is ON, the
peak level of a received signal strength or the
output power is displayed for approximately 0.5
seconds.
e
ANTENNA ICON (p. 158)
Displays which antenna connector is selected for
HF/50 MHz.
• “ANT1” appears when the [ANT1] connector is se
-
lected.
• “ANT2” appears when the [ANT2] connector is se
-
lected.
r
ANTENNA TUNER ICONS (pp. 159, 160)
➥
“
” appears when the antenna tuner is
turned ON; “
” blinks during tuning.
➥
“
” appears when the optional AH-4 external
antenna tuner is connected to the [ANT1] con-
nector, and [ANT1] is selected.
t
FUNCTION DISPLAY (p. 19)
Shows the function of the function switches ([F1]–
[F5]), Set mode items and IF passband width.
y
MEMORY CHANNEL READOUTS
Displays the selected memory channel.
u
SELECT MEMORY CHANNEL ICON
➥
Appears when the selected memory channel is
set as a select memory channel. (p. 151)
➥
Appears when the repeater can be selected as
the access repeater in the DR mode. (p. 100)
i
DR MODE ICON (p. 43)
Appears when the DR mode is selected.
o
RIT/
∂
TX ICONS (pp. 69, 81)
➥
“RIT” appears when the RIT function is turned
ON.
➥
“
∂
TX” appears when the
∂
TX function is turned
ON.
➥
Shows the shift frequency of the RIT or
∂
TX
function.
!0
VOICE SQUELCH CONTROL ICON (p. 146)
Appears when the VSC (Voice Squelch Control)
function is turned ON.
!1
DUPLEX ICON (p. 65)
“DUP+” appears when plus duplex, “DUP –” ap-
pears when minus duplex (repeater) operation is
selected.
!2
DIAL LOCK ICON (p. 77)
Appears when the Dial Lock function is turned ON.