![background image](http://html.mh-extra.com/html/icom/i9100/i9100_instruction-manual_611948177.webp)
168
14
SET MODE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
USB2/DATA1 Func
64.
(Default: -----/[GPS ])
Select the function of the [DATA1] jack.
•
----- : The [DATA1] jack is not used.
• RTTY : Used to send RTTY decoded signals.
• DVdat : Used for low-speed data input and output.
• GPS : Used for the GPS receiver connection for
position data input.
GPS Out
65.
(Default: OFF)
When a GPS receiver is connected to the [DATA1]
jack, the GPS position data is input through the jack.
You can select whether or not to send the data from
the COM port (“USB2”).
NOTE:
You can use this function only when “
-----”
or “DVdat” is selected as the “USB2/DATA1 Func”
(63) option, and “GPS” is selected as the “USB2/
DATA1 Func” (64) option.
• OFF
: Turns the function OFF.
• DATA1
➔
USB2 : Sends the GPS position data from
the COM port (“USB2”).
DVdat/GPS Out Baud
66.
(Default: 4800)
Set the DV or GPS data transfer speed to 4800 or
9600 bps.
RTTY Decode Baud
67.
(Default: 9600)
Set the RTTY decode monitor speed to 300, 1200,
4800, 9600 or 19200 bps.
Calibration Marker
68.
(Default: OFF)
Use as a simple frequency check of the transceiver.
See page 179 for calibration procedure.
NOTE:
Turn OFF the calibration marker after check-
ing the frequency of the transceiver.
• OFF : Calibration marker OFF
• ON : Calibration marker ON
REF Adjust
69.
During frequency calibration, set the internal refer-
ence frequency to between 0% and 100% range in 1%
steps.
NOTE:
The default setting is different for each
transceiver.