![background image](http://html.mh-extra.com/html/icom/i9100/i9100_instruction-manual_611948098.webp)
89
7
DV MODE PROGRAMMING
■
Repeater list programming
New repeater list
1.
programming
q
Push [DV
•
DR] to select the DV mode.
w
Push [MENU] one or more times to display the “M3”
screen (Menu 3).
• In the DR mode, p
ush [MENU] once or twice to select
the “D1” screen.
CS
C D
R > C S
U R
DSET
M3
When the “M3” screen is selected.
e
Push [DSET](F-5) to display the “DSET” screen.
DSET
T X M
R P — L
S E T
r
Push [RP-L](F-4) to display the “RP-L” screen (Re-
peater list).
RP–L
R e p e a t e r L i s t
C L R
A D D
E D T
t
Push [ADD](F-3) to display the “NAME” item (Re-
peater name).
RP–L
N A M E :
Ú
E D T
Ù
To cancel the programmed data:
After programming, push [MENU] to display
“Cancel OK?.” Push [YES](F-4) to cancel pro
-
gramming and return to the “RP-L” screen (Re-
peater list), or push [NO](F-5) to keep program-
ming and return to the previous screen which
was selected before pushing [MENU].
Repeater name programming
2.
y
Push [EDT](F-4) to enter the repeater name pro-
gramming mode.
• A cursor appears and blinks.
Blinks
RP–L
N A M E :
A B C
Ω
≈
D E L
S P C
u
Push [ABC](F-1) one or more times to select the
desired character type.
Character type
Selectable characters
ABC
A to Z
abc
a to z
etc
! # $ % & \ ?
" ’ ` ^ + –
✱
⁄ . , : ; =
< > ( ) [ ] { } ¦ _ ¯ @
i
Rotate [MAIN DIAL] to select the first character or
symbol to input.
When inputting numbers or a decimal point, push
the appropriate keypad key.
• Push [DEL](F-4) to delete the selected character, sym
-
bol or number.
• Push [SPC](F-5) to input a space.
• When all 9 characters have been
programmed, an error
beep sounds. If you want to reprogram, push [
Ω
](F-2) or
[
≈
](F-3) to select a character, then push [DEL](F-4) to
delete it.
o
Push [
Ω
](F-2) to move the cursor backward, or push
[
≈
](F-3) to move the cursor forward.
!0
Repeat steps
u
through
i
to program a name of
up to 9 characters.
!1
Push [MENU] to save the name.
Repeater
3.
call sign programming
!2
Push [
Z
](F-2) to display the “CS” item (Repeater
Call Sign).
!3
Push [EDT](F-4) to enter the repeater call sign pro-
gramming mode.
• A cursor appears and blinks.
RP–L
C S
:
Ω
≈
D E L
S P C
Blinks
!4
Rotate [MAIN DIAL] to select the first character or
symbol (‘/’ only) to input.
When inputting numbers, push the appropriate key-
pad key.
• Push [DEL](F-4) to delete the selected character, sym
-
bol or number.
• Push [SPC](F-5) to input a space.
• When all 8 characters have been
programmed, an error
beep sounds. If you want to reprogram, push [
Ω
](F-2) or
[
≈
](F-3) to select a character, then push [DEL](F-4) to
delete it.
!5
Push [
Ω
](F-2) to move the cursor backward, or push
[
≈
](F-3) to move the cursor forward.
!6
Repeat steps
!4
through
!5
to program a repeater
call sign of up to 8 characters.
!7
Push [MENU] to save the call sign.
RP–L
C S
: JP3YHH B
Ú
E D T
Ù
Be sure to add a letter after a repeater call sign,
as the repeater node (port), according to the re-
peater frequency, as shown below. Note that
Japanese repeater node letters are different.
• 1200 MHz : A (B in Japan)
• 430 MHz : B (A in Japan)
• 144 MHz : C (no D-STAR repeaters in Japan)
Cross band operation between different nodes in
the same repeater area can be made.