![background image](http://html.mh-extra.com/html/icom/i9100/i9100_instruction-manual_611948011.webp)
2
1
PANEL DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
o
MAIN BAND RF GAIN CONTROL/
SQUELCH CONTROL [RF/SQL]
(outer control; p. 44)
Rotate to adjust the RF gain and squelch threshold
level for the MAIN Band.
The squelch removes noise output to the speaker
when no signal is received. (closed condition)
• The squelch is particularly effective for AM and FM, but
also works in other modes.
• The 12 to 1 o’clock position is recommended
for the
most effective use of the [RF/SQL] control.
•
[RF/SQL] operates as only an RF gain control in SSB,
CW and RTTY (
Squelch is fixed open), or a squelch
control in AM, FM and DV (RF gain is fixed at maxi-
mum sensitivity), when “Auto” is selected as the “RF/
SQL Control” item option in the Set mode. (p. 162)
• When used as an RF gain/squelch control
Maximum
RF gain
S-meter
squelch
Noise squelch (FM/DV modes)
Squelch is
open.
RF gain
adjustable
range
Recommended level
• When used as an RF gain control
(Squelch is fixed open; SSB, CW and RTTY only)
Minimum RF gain
Adjustable
range
Maximum
RF gain
While rotating the RF gain control, a faint noise may
be heard. This comes from the DSP unit and does
not indicate an equipment malfunction.
• When used as a squelch control
(RF gain is fixed at maximum.)
Squelch is
open.
S-meter
squelch
S-meter squelch
threshold
Noise squelch
threshold
(FM mode)
Shallow
Deep
Noise squelch (FM/DV modes)
!0
MAIN BAND AF CONTROL [AF]
(inner control; p. 45)
Rotate to adjust audio output level to the speaker or
headphones on the MAIN Band.
Increases
Decreases
!1
NOTCH SWITCH [NOTCH] (p. 77)
(Mode = Auto notch : SSB/AM/FM
Manual notch : SSB/CW/RTTY/AM)
➥
In the SSB and AM modes, push to toggle the
notch function between auto, manual and OFF.
• Either the Auto or Manual notch function can be
turned OFF in the “[NOTCH] SW” item of the Set
mode. (p. 36)
➥
In
the
FM mode, push to turn the Auto Notch
function ON or OFF.
➥
In
the
CW or RTTY
mode, push to turn the Man-
ual Notch function ON or OFF.
• “MNF” appears when the Manual Notch function is
ON.
• “ANF” appears when the Auto Notch function is ON.
• No indicator appears when the notch filter is OFF.
➥
Hold down for 1 second to switch the manual
filter characteristics from wide, mid and narrow,
when the Manual Notch function is selected.
✔
What is the notch filter?
The notch filter is a narrow filter that eliminates un-
wanted CW or AM carrier tones, while preserving
the desired voice signal. The DSP circuit automati-
cally adjusts the notch frequency to effectively elim-
inate unwanted tones.
!2
MANUAL NOTCH FILTER CONTROL [NOTCH]
(outer control; p. 77)
Rotate to adjust the notch frequency to reject an
interfering signal while the manual function is ON.
• Notch filter center frequency:
SSB/RTTY
: –1040 Hz to +4040 Hz
CW
: CW pitch freq. –2540 Hz to
CW pitch freq. +2540 Hz
AM
: –5060 Hz to +5100 Hz
Higher frequency
Lower frequency
The optional UX-9100 is required for 1200 MHz frequency
band operation.
The optional UT-121 is required for DV mode operation.